Concrete Driveways in Gonzales, LA

Most of the Baton Rouge area sits on clay that swells when it's wet and shrinks when it dries. A driveway poured over soft or organic soil moves with it, and that's where cracks and sunken edges start. A lasting driveway starts underneath. We excavate to firm ground and remove what's soft. Every Parish pour is a commercial 3,500 PSI mix with fiber included, which gives the slab more strength and better resistance to the small shrinkage cracks that form as concrete cures. Expansion joints go in where the driveway meets the house, the street or other slabs, and control joints give any cracking a straight, planned place to happen.

Reinforcement comes in different forms that do different jobs. Fiber is mixed into the concrete itself and spreads through the whole slab, helping control the shrinkage cracks that show up while concrete cures. It's included in every Parish pour. Steel highway mesh comes in heavy flat sheets, and rebar is steel bar tied in a grid. Both add tensile strength and help hold a slab together under heavy, concentrated loads. For a driveway that carries everyday cars and pickups, our 3,500 PSI fiber mix is what we pour. If your driveway will see commercial vehicles, heavy trailers, RVs or similar loads, we recommend adding steel highway mesh or rebar. We quote it as a separate add-on so you can see exactly what it adds and decide with the full picture in front of you.

Broom finish is the standard for driveways for good reason. The light texture gives tires and shoes grip when the slab is wet, and it's the simplest surface to keep clean. Stained concrete adds color to a plain slab and works well when you want the driveway to complement the house or tie into a patio. Stamped and stained concrete gives the look of stone, brick or pavers with the strength of a solid slab, and many homeowners use it on a front walk, a parking court or a border along the drive while keeping the main lanes broom finished. Stamped surfaces can be slicker than broom finish, so think about slope and shady spots. Your project manager can walk you through samples at the walkthrough.

In South Louisiana, a heavy afternoon storm can drop more water than the ground can take in, so a driveway has to move water somewhere on purpose. A good slab slopes away from the house and garage and toward the street, a ditch or a drain, never toward your foundation or into a low spot where water will sit. At the free walkthrough we measure the pour, shoot the grade and look at where water goes today, then set the forms so the finished driveway carries water off the right way. Our pricing assumes a typical residential lot with limited grade changes. If your property has a big grade change or a spot that holds water, we'll tell you at the walkthrough and price that work separately instead of surprising you later.